1/14
Model Overview & Print Notes
Summary
This is a remix of "Round Welding Goggles".You can find the base model under this link: https://www.thingiverse.com/thing:6268576
I added a hinge with a second lens holder. The hinge slides between the cap and the main body of the goggles (5 mm gap).
The additional lens holder is connected to the hinge through a 6 mm hole.
You can 3D print "roll.stl" and use it as the hinge pin, or use a screw or something similar.
If your hinge has low friction you can use insulating tape to hold it better or print "hinge block add-on.stl" and put it on the hinge. It has a tooth which should stop the hinge in open and closed position.
Print Settings
Printer Brand:
Creality
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>70%</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Use rafts when printing "roll.stl" and "extended roll.stl"</p></div>Post-Printing
Hinge lock
<div><p>You can also use "extended roll.stl" and a zip tie to make the hinge lock</p></div> <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/0f/6f/2b/e8/d8/IMG_20261103_122426900.jpg"></p> <p class="detail-caption"><strong>zip tie hinge lock</strong></p> <div><p>Some parts may need sanding </p></div>
💬Thingiverse Community Comments(1)
★Thingiverse Original Reviews