Model Overview & Print Notes
Summary
These articulated snakes have 36 joints, though at the scale I have provided there is plenty of room for more links, should you want to add them!
All body links, except the one closest to the tail-tip, and the rattle, are identical so you can copy/paste them to make the body longer.
The size I have provided is the largest I could make the full-colour version before printing time became too long. Be aware that bleeding can occur if your filament has additional qualities to it (such as sparkle glitter).
Brims and supports are not required on the entire model, but is recommended on the “head” segment of the cobra/Arbok, as the part is tall. The only exception is if you use a textured PEI plate, whereby a brim is needed on all segments.
If you want to use other slicing software, please use the raw STLs when importing into your slicer, as the Bambu Studio one does not work outside Bambu Studio. Please be aware that only the Bambu Studio 3MF has paint data on them.
To sell prints of these models please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards
Print Settings
Printer Brand:
Bambulabs
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>Bambu X1C</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15%</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Whilst supports are NOT needed on the Rattlesnake/Ekans, I recommend using supports on the "head" portion of the Cobra/Arbok, as it is tall.</p><p>Do not use supports anywhere else.</p></div>
💬Thingiverse Community Comments(0)
★Thingiverse Original Reviews