This is a platform set for decorating "3Dino Puzzles".
(It will be the successor model of the previously released "3D Puzzle Museum Kit-A & B".)

This set comes with a new type of platform. This platform is made so that the dinosaur puzzle and signboard can rotate 360 degrees. Adjust the angle freely to decorate.
The sides of the platform all have different shapes, so the way the pathway looks depends on how it is placed. If you place several of them, you can create your own dinosaur museum.

In addition to this set, other dinosaur puzzles have been released, and of course, the ones in this series can be displayed on the platform. Choose your favorite dinosaur from the links below.
https://www.thingiverse.com/stag_b/collections/3dino-puzzle-series

When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20~,40~ parts/packages, Tight applies to 30~,50~)
For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.

[Print Settings]
Rafts:No
Supports:No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Pitch(Layer height): 0.1mm or 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s

[3D Print Time]
{All}
Pitch 0.3mm: 1h16min
Pitch 0.1mm: 24h47min

[T-Rex]
Pitch 0.3mm: 1h35min
Pitch 0.1mm: 3h:06min

{Ptera}
Pitch 0.3mm: 1h19min
Pitch 0.1mm: 2h:30min

{Platform A}
Pitch 0.3mm: 2h08min
Pitch 0.1mm: 5h22min

{Platform B}
Pitch 0.3mm: 6h02min
Pitch 0.1mm: 24h37min

I am releasing commercial versions. These come with files for laser cutting as well as 3D printing. If you don't have the right size, don't worry. You can also generate a file from the included f3d that adjusts the notch length to the appropriate length for your machine!
If you are interested, you can purchase them from my Cults or Etsy store.
https://cults3d.com/en/users/STAG-B/3d-models
https://www.etsy.com/shop/STAGBshop?ref=dashboard-header