*Update Posted 10-21-22
The shape of the joint was changed to a type that can be attached anywhere.
Therefore, only file 202 and 302 is available for joints, and files 203-205 and 303-305 have been deleted.

*Update Posted 05-22-23
New platform design and updated 201-205 and 301-304 models.

This is Dinosaur Museum 3D puzzle set that comes with 8 dinosaur puzzles and platforms to display the puzzles.
This set comes with a new type of platform. This platform is made so that the dinosaur puzzle and signboard can rotate 360 degrees. Adjust the angle freely to decorate.
The sides of the platform all have different shapes, so the way the pathway looks depends on how it is placed. If you place several of them, you can create your own dinosaur museum.
In addition to this set, other dinosaur puzzles have been released, and of course, the ones in this series can be displayed on the platform. Choose your favorite dinosaur from the links below.
https://www.thingiverse.com/stag_b/collections/3dino-puzzle-series

When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20~,40~ parts/packages, Tight applies to 30~,50~) For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.

[Print Settings]
Rafts:No
Supports:No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Pitch(Layer height): 0.1mm or 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s

[3D Print Time]

{Platform A}
Pitch 0.3mm: 2h20min
Pitch 0.1mm: 5h:34min

{Platform B}
Pitch 0.3mm: 2h53min
Pitch 0.1mm: 6h:54min

{Platform C}
Pitch 0.3mm: 2h31min
Pitch 0.1mm: 5h:58min

{Stand}
Pitch 0.3mm: 3h09min
Pitch 0.1mm: 6h:43min

[T-Rex]
Pitch 0.3mm: 1h35min
Pitch 0.1mm: 3h:06min

[Bronto]
Pitch 0.3mm: 1h33min
Pitch 0.1mm: 3h:00min

[Allo]
Pitch 0.3mm: 1h26min
Pitch 0.1mm: 2h:45min

[Trike]
Pitch 0.3mm: 1h33min
Pitch 0.1mm: 3h:00min

[Spino]
Pitch 0.3mm: 1h33min
Pitch 0.1mm: 3h:00min

[Stego]
Pitch 0.3mm: 1h34min
Pitch 0.1mm: 3h:02min

[Plesio]
Pitch 0.3mm: 1h31min
Pitch 0.1mm: 2h:58min

{Ptera}
Pitch 0.3mm: 1h19min
Pitch 0.1mm: 2h:30min

I am releasing commercial versions. These come with files for laser cutting as well as 3D printing. If you don't have the right size, don't worry. You can also generate a file from the included f3d that adjusts the notch length to the appropriate length for your machine!
If you are interested, you can purchase them from my Cults or Etsy store.
https://cults3d.com/en/users/STAG-B/3d-models
https://www.etsy.com/shop/STAGBshop?ref=dashboard-header