Model Overview & Print Notes
Summary
A plant pot bought at an estate sale. Quite hard material possibly ceramic. The surface contains raised gold strips; the hollows are filled with blue green material. A small gold label on the bottom says made in Taiwan. There are no other markings. An Autodesk ReCap Photo copy at 70% scale.
Print Settings
Printer Brand:
MakerBot
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>MakerBot Replicator+</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Yes</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2 mm</p></div></p>How Done
The container was closed with a towel, see image above, and photographs taken with a Canon Rebel T3i (ca 60 from different directions). The jpg images were treated with Autodesk ReCap Photo; the resulting STL file was decimated and scaled to be about 70% of the size of the original pot. A new mesh was created with MeshLab's Uniform Mesh Resampling filter. The new mesh was smaller than the original; the distance between the meshes was set to 3.5 mm. The inner mesh was inverted, the two meshes flattened, and the output from MeshLab was a single hollow STL file with a wall thickness of about 3.5 mm. The STL file was transferred to OpenSCAD; two cylinders were created, oriented, and subtracted from the STL file with a difference command. A cylindrical opening with a flat edge was thus created.
💬Thingiverse Community Comments(4)
★Thingiverse Original Reviews