1/12
Model Overview & Print Notes
Summary
This is a print-in-place chainmail-like fabric with the posibility to connect the smaller patches to something bigger, like clothing and such.
This is version 2.0, here is the first version: https://www.thingiverse.com/thing:2942351
here is the Spin-Off Fabric of Love <3 <3 <3: https://www.thingiverse.com/thing:3505788
Print Settings
Supports:
No
<p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.1 - .2 mm</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>Scaled 100% and lower --> 100% infill</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Step 1 - choose a file - I added 4 sizes: 1x1; 4x4 ; 10x10 ; 23x23 (I can add more if you ask nicely) as well as the link/connector which you will need later - If it's you first time, start with the smallest patch or the single piece to make sure your printer is set up right.</p><p>Step 2 - choose your scaling - From 50% to whatever fits on your printing bed.<br>At 100% the individual links measure 11x11mm with 1mm space between them.</p><p>Step 3 - At 100% scale and below I'd recommend full infill - pro-tip: when using Simplify3D include a solid diaphragm every layer to ensure "real" 100% infill.</p><p>Step 4 - After printing, carefully remove the printer under the Fabric of Thyme™.</p><p>Step 5 - If it's not already awesome enough, wiggle around, throw it at walls, a little squiching and kneading until the single links can all move freely. </p><p>Step 6 - Do whatever crazy thing you have in mind!</p><p>Step 7 - Share a made - I would love to see what y'all can make out of this! </p></div>
💬Thingiverse Community Comments(27)
★Thingiverse Original Reviews