Summary

Name: CR-10 Mod - X axis Tensioner
Brand: Thingiverse
Availability: InStock

Update of 02/06/2019

MAJOR UPDATE

X Tensioner for CR-10 / CR-10S

Mk7 Version

Upgraded the guide system and simplified all the models
Unified the screws dimensions (with my other tensioner versions)
Modified the minimum belt tensioning position (for short belts)
Slightly increased the tolerances compared to previous models
Added a New Shaped Knob, more "fancy" than the previous version.

Printing Tips :

Body --> Print in Vertical (better with supports, but not strictly necessary)
Screw --> Print Horizontally, lying on the flat face
Knob --> Print in Vertical (No supports Required)

Hardware Requirement :

For the OEM Version :

1 Screw M8x25
2 Bearings F688Z
1 Screw M4x8 (Button Head) + Adapter, Or The OEM M8 screw
1 T-Nut M4

NOTE : The OEM screw version has been prepared due to some users request, but I did not recommend to use it due to possible weakness problems.!

For the GT2 Version :

1 GT2 Pulley 20T
1 Screw M3/M4/M5 x20 (according the Pulley bearings)
1 Screw M4x12 (Button Head)
1 T-Nut M4

Fixing system :

1 screw M4x8
1 t-nut M4

The models are designed for the material stated below.

Note :

All the pieces has been tested and fit correctly.

If you cannot fit the pieces after the print, you are doing something wrong!

(Sorry guys, but I am tired of comments from people who are unable to print, and blame the models...)

Update of 15/09/2020

Updated Models to Version Mk8,
The body can fit also Gates Pulleys 10 mm Wide.
Added Screw For Gates GT2 20T Pulley.

Enjoy

The tensioner has been designed for the CR-10 (and relative versions), but can be used also for the Ender 3, and similars printers that uses 2020 V-slots profiles.

Enjoy

Support my Creations : Buy Me a Beer!

Credits :

fooyabt - fessyFOO's Yet Another Belt Tensioner by Fessyfoo are licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50</p></div></p>                                                    <strong>Filament:</strong> Sunlu PLA+                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Screw printed in Horizontal!<br>Body printed in vertical (I used supports)<br>Knob, printed in Vertical, does not require supports!</p></div>

Tags (10)