Model Overview & Print Notes

This is the exact same planter as the Grid, just without the texture so it prints much faster. I really like the simplicity of this one and have put up a bunch of these around my house. It's a pretty neutral design that could blend in to almost any aesthetic. **Supports** The only version of this that I've been using supports on is Wall Simple Cup Pot 4.5. All other versions do not need supports. For Wall Simple Cup Pot 4.5, I use supports under the sliding dovetail on the pot. The slicer is going to want to add supports underneath the pot as well, which is unnecessary, so I added a support blocker to the whole pot and a support enforcer under the dovetail. **Scaling** I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws. **Orientation** The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up. **Print Settings** .2mm layer height 15% grid infill. I've been using gyroid for the 4.5" command mount and it's much cleaner. 2 walls **Filament & Hardware** Filament I used for this print: HATCHBOX Magic Stone PLA Hardware: #10-12 x 1-1/4 in screws Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/