Model Overview & Print Notes

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards. I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around. Print settings are as usual for my Gridfinity items: Layer height: .24 - .32 Top / Bottom Layers + Walls: 3 - 4 Infill: 10% - 20% Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea. ____________________________________________ Find all of my Gridfinity models here: https://thangs.com/search/%22--thingymaker9000gridfinity--%22?scope=all --thingymaker9000gridfinity-- ____________________________________________ If you find these or anything else I make useful, you can buy me a beer over here: https://www.buymeacoffee.com/thingymaker9000 Enjoy!