Model Overview & Print Notes

# CHOIS Saw Guide & Saw Guide Ring - Free A 3D-printed cutting jig for the CHOIS modular furniture system. Holds your dowel in place so you can cut cleanly every time - no clamp needed. Two cut modes: - 90deg / Square cut: for standard cross-cuts - Angled cut: for leg angles when resting dowels directly on the floor without end caps Slide your dowel into the circular channel and run your saw along the guide wall. --- ## This file includes two parts: **saw_guide.stl** The main jig. Holds the dowel and guides your saw. **saw_guide_ring.stl** A cylindrical collar that slides onto the dowel. Use it two ways: - Mark your cut line by running a pencil along the edge of the ring - Place it under the far end of the dowel to match the height of the Saw Guide, keeping the dowel level during cutting --- ## Compatible dowel size Designed for 32mm dowels (snug fit). 30mm dowels also work with a slightly looser fit. ## Saw compatibility Kerf width up to 0.8mm. The guide slot is 0.8mm - thicker saw blades can be used - the slot will widen naturally as you cut. **Note:** A tape measure is still needed to mark your cut length before using this guide. ## Print settings - Material: PLA or PETG - Infill: 15% (default) - Supports: None --- **This file is free.** It's a companion tool for the CHOIS modular furniture system. If you're ready to build - joints, trays, shelves, and more - the full CHOIS library is available via subscription on this profile. **Note:** The product photo shows two colors - this is due to a filament change mid-print and has no effect on function. Print yours in any single color.