Suggestions for Printing:

    Material: PLA (but feel free to use what you want)

    Layer Height: 0.20 mm Layer Height with 0.40 mm Nozzle or 0.30 mm Layer Height with 0.60 mm

    Nozzle: 0.40 mm Nozzle or 0.60 mm Nozzle

    Number of Walls: 3 or 4 min.

    Infill Density: 15%, rectilinear for strength

    Top & Bottom Thickness: ~1.0 mm or slightly more

    Wall Generator:  Classic

    Order of Walls: Inner/outer/inner

    Supports: Not required

Use Inner & Outer Brims. This will help minimize or eliminate corner lift off and/or warping. Or use the mouse ears as shown in the pictures.

All three sized designed to be used with No. 8 wood screws.

If you need a special size that's not already shown please contact me.

Note: Use best judgement when mounting and using/loading these items!:

1. Use high quality fasteners that anchor securely to structural component (i.e.: wall studs). Use of dry wall anchors is not recommended.

2. The ultimate strength of these item will depend on factors like print quality, material used, orientation, infill density, number and thickness of walls, etc. .  will have a dramatic impact on the strength and integrity of these shelf bracket. 

These models and/or the items created from these models are not available for commercial sale in any form.