Created a few trays/accessories that are compatible with the BrimHart Board Game table slots. All parts designed to print on 225x225x280mm print bed but you can scale the width if you want bigger trays. Have only Printed Small tray and rulebook holder so far, but everything else should function the same apart from the size.

Please let me know how they end up working for you and any modifications/additions you'd like to see. Still unsure what the optimal balance of depth/width for general play is. Feedback encouraged.

Depending on your printer, you may have to print everything on its “side” like I did. One of the pictures shows how I oriented it to fit on a 225 print bed.

(Depth is measured from the innermost face of the table's slot)

Small: 140 deep x 190mm Wide

Medium: 173 deep x 240mm Wide

Large:  203 deep x 270mm Wide

Max: 267 deep x 270mm Wide (largest tray you can realistically print on a 225x225mm bed)

Do a test print of the “tolerance Test” file before printing something large.  Not sure how consistent the tables are but this works on mine. Let me know if it doesnt work on yours.