This is the Haptic Hog

I love a Harley.

This project is awesome in my humble opinion.

The all black version which you can paint as i did is a much , much shorter print time than the optional full filament print time

It is a cool Harley made in a plain filament, a slightly filament painted style and a full filament paint job to cover all printing choices.

I chose to hand paint it as that is what I love to do plus less time printing but the choice is up to you.

This is for the PS5 controller only. I have also made it as a stand alone model only for display.

I have added the base in both plain and full filament painting choices and made a vintage crash helmet for the pad and as it amused me.

Safety first right 😎.

The base design has been remodelled slightly to original one showing In the picture to produce more secure deeper ruts for the tyres.

A dab of super glue to the tyre ruts of the base to secure the bike in to.

And a little care and paitience removing supports.

As always please enjoy.

Super glue safety bit

Substance: Ethyl Cyanoacrylate.

Hazards: Bonds skin and eyes in seconds. Causes skin irritation, serious eye irritation, and respiratory irritation.

Key Risk: Exothermic polymerization (rapid heat generation) if spilled on clothing, particularly cotton or wool.

Before any work begins, ensure the following PPE is worn:

Gloves: Nitrile or polyethylene gloves. Do not wear cotton or fabric gloves, as they react violently with cyanoacrylate.

Eye Protection: Safety goggles or glasses.

Ventilation: Use only in well-ventilated areas to avoid inhaling excessive vapours.

Emergency Response & First Aid

Skin Bonding: Do not pull the skin apart. Immerse in warm, soapy water or apply acetone to penetrate the bond, then peel gently with a blunt edge.

Eye Contact: Do not force eyes open. Flush immediately with warm water or apply a moist gauze patch, and seek immediate medical attention.

Spillages: Do not use cloth rags for cleaning. Cover spills with an inert, non-reactive absorbent material (e.g., sand) and allow to solidify, then dispose of as solid waste.