🌊 Filigree Ocean Ornaments – Easy Support Marine Trio

Bring the elegance of the ocean directly to your printer! This exclusive set includes three splendid, finely detailed marine sculptures: a majestic Seahorse, a sinuous Spiral Shell, and a dynamic Betta Fish

Each model features a unique filigree design, crafted to enhance light reflections and maximize the appeal of any filament (from classic matte PLAs to silky Silks, and even dual-color ones). As you can see in the real photos, the final result is a smooth, clean, and visually striking piece of art

🛠️ Designed to print, not to despair! (Easy Support)

We know how frustrating it can be to damage a detailed model during support removal. For this reason, the entire trio has been geometrically optimized

• Minimal supports: Placed only where strictly necessary
• Instant detachment: Designed to snap off with light pressure, leaving the model's surface perfectly clean and free of unsightly marks
• No complex post-processing: Forget hours spent sanding or using a utility knife. Print, remove supports in seconds, and your model is ready to display!

✨ Model Features

• Premium Details: High-resolution ornamental textures that highlight the precision of your 3D printer
• Guaranteed Stability: Each creature rests on an integrated, solid, and elegant decorated base, ensuring excellent build plate adhesion and perfect stability once displayed
• Perfect Scalability: The models maintain easy support removal and detail sharpness even if you enlarge or reduce the model

🚀 Recommended Print Settings (Print Profile Ready)

To achieve the same impeccable quality shown in the photos, I recommend following these parameters

• Layer Height: 0.2mm or 0.12mm (to best capture the filigree curves)
• Walls/Perimeters: 2 or 3 for optimal surface finish
• Infill: 15% - 20% (Gyroid or rectilinear)
• Recommended Supports: Activate Tree Supports (Slim/Branch) oriented only on the build plate (On Build Plate Only). The support interface is optimized for clean detachment
• Adhesion: A small outer Brim is recommended only for the Betta Fish if you have ventilation or build plate adhesion issues

📸 Share your artwork!

If you appreciate my work, leave a like (❤️) and a 5-star review! It's the best way to support independent designers on MakerWorld

Don't forget to upload a photo of your print in the "Make" section: I'm curious to see which filaments and color combinations you'll use to bring this marine trio to life!