I print small, flexible 3D models and heat-press them directly onto T-shirts.
This creates unique and durable 3D prints that combine 3D printing technology with fashion 👕🖨️
A simple way to create your own custom style.

Instructions 🛠️👕

1. Download the model and open it in Bambu Studio 💻
2. After printing, carefully remove the model from the build plate.
   ⚠️ Avoid sudden movements — the model is only 0.3 mm thick and can be easily damaged or torn.
3. Prepare your ironing area: set up an ironing board and an iron, then preheat the iron 🔥
4. Place the T-shirt on the ironing board, position the printed model on the desired area, and cover it with heat-resistant paper (e.g. baking/parchment paper) 📄
5. Using the preheated iron, press onto the model (or move the iron evenly, depending on the size of the model) for 15–20 seconds ⏱️
6. Wait a moment, then remove the paper. The model should separate easily and remain on the T-shirt ✅

7. (Optional) Turn the T-shirt inside out and iron the area where the model is applied for an additional 5–10 seconds 👕✨
   
   Important :⚠️

   T-shirts with prints should be washed at a temperature not exceeding 50°C (122°F).
   Washing at higher temperatures may cause the model to peel off from the fabric 🧼🌡️