Model Overview & Print Notes

Hi, I made this with the tool Hueforge. I used voxel black, white, red, and Bambu light matte blue. If I were to do it again I would use a brighter red like in the picture. I hope you enjoy it! ## 3D Printing Settings Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #8 at 0.72mms Red until layer #11 at 0.96mms Light blue until layer #22 at 1.84mms White until layer #32 at 2.64mms