Model Overview & Print Notes

This is a simple to print hook that slides into your shelf and can hold headphones, headsets and other gadgets you may have lying around making your workplace messy. This model is designed so you don't have to drill any holes into the shelf and it can fit most shelves as the "clip" is 18mm wide and slides in without damaging the shelf paint or structure. You can also glue a piece of cloth or felt to the inside of the clip. The space for the headset is 50mm wide and have a "stop" wall so the headset won't fall off the hook for any reason. It is also very practical to place and remove the headset from the hook. I made this for personal use, but it became so useful to me and my family that I decided to share with everyone that would also find this helpful. :) ## 3D Printing Settings Printed in PLA Layer Height 0.1 to 0.3 mm Wall Thickness 1.2 mm Infill 65% to 80% I recommend printing it on its side so you won't need to add support structures to the print.