Model Overview & Print Notes

2 different files of 3 or 5 column arches, I printed unsupported in 0.3 mm and 10% fill, and despite a slight runout on the underside of the arch, printing went off without a hitch. You can use a light backing if you prefer. The files for the stone decor can be found here : https://cults3d.com/en/3d-model/various/decor-de-pierres and other realizations and sets here: https://cults3d.com/en/3d-model/various/temple-antique-rfbat-641e https://cults3d.com/en/3d-model/various/viaduc-antique https://cults3d.com/en/3d-model/home/diorama-decor-antique https://cults3d.com/en/3d-model/art/dallage-greco-romain https://cults3d.com/en/3d-model/art/decor-de-pierre-v2 https://cults3d.com/en/3d-model/art/colonnes-antiques You can find all my designs by clicking RFBAT in the CULTS search engine. Feel free to share your make! ## 3D Printing Settings Layer height 0.2 to 0.3 mm filling 10 to 20 wall thickness 0.8 to 1.2 mm