🧢 Cap Wall Mount – Display Your Collection in Style

Your favorite caps deserve better than being stacked in a drawer, thrown onto a shelf or piled on top of each other. 😎

The Cap Wall Mount turns your cap collection into part of your room.

Its compact, minimalist design keeps the holder discreet while putting the cap itself in the spotlight. The cap is supported by the long horizontal arm, while the small upper hook catches the cap around the top button area and helps keep it securely positioned.

Simple. Clean. Functional. 🖤

Perfect for a bedroom, gaming room, office, dressing room, hallway, sneaker room or walk-in closet.

✨ Features

🧢 Clean Wall Display
Turn your caps into decoration instead of hiding them away.

🔩 Two Mounting Options
Use the two integrated mounting holes for screws, or attach the holder with suitable strong double-sided mounting tape.

💎 Minimalist Design
The mount stays visually in the background and lets your cap do the talking.

⚡ Fast & Easy Print
One single part. No assembly. No complicated mechanism.

🚫 No Supports Required
Designed to print easily when placed in the recommended orientation.

🎨 Any Color You Want
Black for a stealthy look, white for a clean modern setup, or match the holder to your room and cap collection.

🏠 Perfect Almost Anywhere
Gaming room, bedroom, office, closet, hallway, studio, shop display and more.

📐 Dimensions

The model measures approximately:

81.8 × 66.4 × 16.2 mm

Small enough to stay discreet, but large enough to properly support the cap.

🔧 Mounting Options

🔩 Screw Mounting

Two integrated holes allow the holder to be mounted securely to the wall.

Simply choose suitable screws and wall plugs for your wall type.

This is the best option if you want a permanent and very secure installation.

🟥 Adhesive Mounting

Don't want to drill?

The holder can also be mounted using strong double-sided mounting tape, such as high-quality mounting tape or VHB-style tape.

Apply the tape to the flat rear wall-contact surface of the holder.

Make sure both the wall and the holder are clean and free from dust or grease before installation.

Adhesive strength depends heavily on the tape and wall surface used.

🖨 Recommended Print Settings

Layer Height: 0.20 mm
Nozzle: 0.4 mm
Walls: 3–4
Top / Bottom Layers: 4–5
Infill: 15–20%
Infill Pattern: Rectilinear / Grid / Gyroid
Material: PLA / PLA+ / PETG
Supports: ❌ No
Brim: Usually not required
Assembly: ❌ None
Print Orientation: Lay the model flat on its large side

💡 Material Recommendation

PLA / PLA+ is more than enough for normal indoor use and gives a clean surface finish.

PETG is a great alternative if you want a little more flexibility and impact resistance.

🧱 Printing Tip

For the cleanest result, place the model with its large flat side directly on the build plate.

This gives the model a large contact surface, keeps printing simple and eliminates the need for supports.

A textured PEI plate also gives the visible surface a really nice finish. ✨

🧢 Build Your Own Cap Wall

Print one for your favorite cap…

…or print an entire set and turn an empty wall into your own cap display. 😎

Clean wall. Clean setup. More room for your passion. 🧢✨