3D model description:

Base for miniature wargames in different sizes

Standard infantry: 25mm

Armored infantry: 32mm

Heavy Infantry/Exoskeletons: 40mm

Monsters / Large Characters: 50 mm

3D printing settings:

Layer Height: 0,05 mm

Bottom Layer Count: 8

Exposure Time: 2,5 s

Bottom Exposure Time: 80 s

Transition Layer Count: 5 Transition

Type: Linear

Waiting Mode During Printing: Resting Time

Rest Time Before Lift: 0 s

Rest Time After Lift: 0 s

Rest Time After Retract: 0,5 s

Or

Layer height: 0.12 mm

First layer height: 0.2 mm

Line width default; 0.42 mm

First layer: 0.5 mm

Outer wall: 0.42 mm

Seam position: Back

Staggered iner seams: Yes

Seam gap: 10 %

Wall loops: 2

Top surface pattern: Monotonic line

Top shell layers; 5

Bottom shell layers: 3

Sparse Infill density: 20 %

Sparse infill pattern: Grid

Sparse infill direction: 45°

Solid infill direction: 45°

First layer speed: 60 mm/s

First layer infill speed: 60 mm/s

Outer wall speed: 200 mm/s

Inner wall speed: 300 mm/s

Slow down for overhangs: Yes

Travel speed: 500 mm/s

Support: Yes

Type: Tree - Organic

Raft: No

Skirt: No

Brim: No