1/7
Model Overview & Print Notes
Kingroon KP3s Pro - LCD TFT RPi GPIO Raspberry Pi Zero 2W
This design has been created to mount a Raspberry Pi TFT with KlipperScreen on our KP3S Pro.
NOTE: This is only compatible with the Raspberry Pi Zero 2W or another model with the same dimensions.
Commercial components
-1 unit - LCD TFT RPi GPIO 3.5" Raspberry https://s.click.aliexpress.com/e/_DemewXd
-6 units - Heat inserts M3xD4.6xL4.0 https://s.click.aliexpress.com/e/_DER818X
-6 units - Screw DIN 912 M3x8 https://s.click.aliexpress.com/e/_Dd1iWuV
Optional
-1 unit - Aluminum case for Raspberry Pi Zero https://s.click.aliexpress.com/e/_DdSQMed
-1 unit – Kit soldering iron for heat insert nuts (Optional) https://s.click.aliexpress.com/e/_DDm7zXP
Printing
The printed parts are designed for a 0.4mm nozzle. Infill should not be less than 20%, recommended 25-30%.
The STL files are shared in the optimal orientation for the best print quality without supports.
Heat Inserts
- 6 units - Heat inserts M3xD4.6xL4.0
Assembly instructions
1. Remove the old TFT screen and install the base of the new TFT using the same screws.
-1 unit - base_lcd_pro.stl
2. Assemble the TFT case
-1 unit - LCD TFT RPi GPIO 3.5" Raspberry
-4 units - Screw DIN 912 M3x8
-1 unit - front_lcd.stl
-1 unit - back_lcd_pro.stl
3. Secure the TFT to the printer base.
-2 units - Screw DIN 912 M3x8
4. Connect the Raspberry Pi to the TFT.
5. LCD Installation
Resource: http://www.lcdwiki.com/3.5inch_RPi_Display
Open a terminal (SSH) and install the driver on the Raspberry Pi.
sudo rm -rf LCD-showgit clone https://github.com/goodtft/LCD-show.gitchmod -R 755 LCD-showcd LCD-show/sudo ./LCD35-show
Wait a few minutes. Once the system reboots successfully, the display will turn on.
To rotate the display, execute the following command:
cd LCD-show/sudo ./rotate.sh 90
6. Install KlipperScreen
Resource: https://klipperscreen.readthedocs.io/en/latest/Installation/
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews