Design Concept

This one is for the 'Trekkie Dads' out there. It's a coaster and keychain tag with the Star Trek logo.

Since this is my first ever coaster - it's ONLY LOGICAL that it would be a Star Trek coaster. 

Printing Recommendations

Coaster Setting - PLA

0.20mm Layer Height

10% Infill

No Supports

Enable 'Slow down on overhangs'

Start with your silver/white/gold - The insignia is debossed so start with that colour.

Pause at Layer 18 - Change to black/blue

Pause at Layer 25 - Back to silver/gold for the ring. (You can skip this one if you don't want the outer ring different.)

There is a bit of an overhang at the start of the print, but I managed to print it without supports on the K1C and the Hi.

Keychain Tag Setting - PLA

0.16mm Layer Height

10% Infill

No Supports

Start with black/blue

Pause at layer 27 - Change to white/silver/gold

Thanks for printing. Please leave a LIKE and show your prints...