1/9
Model Overview & Print Notes
NEW - NOW RESIZED FOR ENDER 3 AND K1
This model is for a fully 3d printed table saw and router sled and tenoning jig.
IMPORTANT: THIS MODEL IS FOR METRIC SIZED HARDWARE - SEE MY OTHER MODEL FOR IMPERIAL
The vertical sled is used for cutting workpieces that are held vertically. It can be used on a table saw and router. Its main purpose is for cutting tenons. The workpiece can be held vertically or at an angle.
The vertical sled features:
A T-slot alignment guide;
Stand-off alignment guides for use with a table saw or router fences
Slotted guides for 45 and 90 pieces and an unslotted guide for other angles
Vertical and horizontal handles for a secure grip.
Two sets of models are provided. One for metric and another for imperial hardware.
Fully 3d printed except for the hardware.
External hardware
For the metric model you will need the following:
3x M10 x75mm hex bolt
6x M10 nuts
6x M6 x 25mm hex bolt
6x M6 nut
4x M4x25mm Wood screw
Assembly instructions are provided in the gif photo.
3D PRINTING
Print profiles are provided.
The model requires very little support.
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews