1/9
![[Exclusive] Gear Path Maze - a set of 5 puzzles](https://pic2-cdn.creality.com/comp/model/av/fbd14061c9a54888c60c45f1e52c648b.avif)
Model Overview & Print Notes
So thrilled to present the "Gear Path Maze - a set of 5 puzzles" a unique creation born from the collaboration between Creality Cloud and
3DBrinumi
Gear Path maze by Mazetropolis! Connect two sides by placing different gears next to each
other forming a chain that will lead one side to spin while you are turning the other side.
But that’s not all! Insert the puzzle grids to make it more challenging - this design package
includes 5 different puzzles each with different blockers that you have to get around OR over
them.
Set includes 6 different gear types:
1) Side gear (placed on each side of the puzzle field vertically).
2) Starter gear (small gear with bevel sides to smoothly interlock with side gears).
3) Small gear - just a regular small gear
4) High gear - small gear that’s twice the height
5) Medium gear - a gear that is larger but the same height as the small gear.
6) Combo gear - a small gear that has medium gear on top of it - used to get over obstacles if
you can not get around them
More design files in this package:
1) Puzzle base - a one time larger print that needs to be printed once and the puzzles are
placed on it.
2) 5 different puzzle grids (placed over the puzzle base)
3) Side gear plug - a plug that’s used to fixate the side gears to the puzzle base
Each level has two side gears, two side gear plugs and two starter gears that are the same for
all 5 puzzles. But each puzzle requires different amounts of small, medium, high and combo
gears.
Puzzle nr. 1 these gears:
1) 4 small gears
2) 1 high gear
3) 1 medium gear
4) 1 combo gear
Puzzle nr. 2 these gears:
1) 4 small gears
2) 2 high gears
3) 1 medium gear
4) 2 combo gears
Puzzle nr. 3 these gears:
1) 7 small gears
2) 2 high gears
3) 1 medium gear
4) 2 combo gears
Puzzle nr. 4 these gears:
1) 2 small gears
2) 2 high gears
3) 2 medium gears
4) 3 combo gears
Puzzle nr. 5 these gears:
1) 5 small gears
2) 3 high gears
3) 2 medium gears
4) 1 combo gear
To print all the required parts to solve every single puzzle, it will take 113 meters of material (336
grams of material). Base part is the largest part that has to be printed and it requires a printer
with a build volume of at least 20 cm (7.88 inches) on the longest side, 16.5 cm (6.50 inches) on
the short side and 5.6 cm (2.21 inches) in height.
Recommended printing settings:
Print infill: 12%
Print type: Gyroid
Brin: NO
Supports: NO
Speed: depends on your printer, but choose precision over speed.
Number of walls: 2
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews