1/9
Model Overview & Print Notes
House Numbers 0-9 - Easy to Set - Printable STL
All house numbers to create any combination from zero to nine.
Easy to print, easy to set and easy to align (all screw holes are aligned for easy installation)
Simple numbers, with 3mm holes.
Sizes are pre-set at: 120mm length, 5mm height and 5mm screw holes.
The screw holes have a slightly bigger "head" for better screw placement.
Feel free to change the size as you prefer (if using more than one number, change all sizes in the same proportion).
This model is simple to print; one side is completely flat, and it can be printed in any material (PLA, Resin, etc.).
However, resin or ABS is always better for outdoor items that will be exposed to the sun for a long time.
You can print directly in your preferred color, or print and paint since it's easy to do.
I used these settings in PLA:
-Dynamic Quality: 0.16mm
-Supports: No
-Printing Temperature: 200 (but I used 220 for V-Silk)
-Build Plate Temperature: 70
-Speed: 40 mm/s
-Build Plate Adhesion Type: Brim
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews