Model Overview & Print Notes

I created this by combining projects from: https://www.thingiverse.com/unstuck/designs, https://www.thingiverse.com/wpvrtis/designs, https://www.printables.com/it/@Solomoriah, and https://www.thingiverse.com/jsrich69/designs. I recommend printing this with PETG or ABS. Do not use PLA because it will not resist the high summer temperatures in your car. As shown in the pictures, I added a rubber disc cut from a bicycle tube and glued inside the arms; this will help keep the mount very stable. I uploaded 2 kinds of bases: one with a single hole for the original bolt, but that wasn't enough for me, so I added a version with 3 holes. To install this version, you will need to drill 2 more holes and add 2 M5 bolts and nuts. Hardware List: 4cm M6 Bolt and Nut for Arms. 7cm M6 Bolt and Nut for the base (I was not able to find a 7cm one, so I cut an 8cm bolt). 4cm M5 Bolt and Nut for the GoPro mount and knob. 4cm M4 Bolt and Nut for the Quad Lock mount. Obviously, you can replace the Quad Lock mount with one you prefer. For any questions, just leave a comment!