Model Overview & Print Notes

Introducing "The Printception Trophy" - a 3D printer-inspired trophy made using a 3D printer! 🏆🖨️ Description: The Printception Trophy is designed to resemble a miniaturized 3D printer in all its filament-fed glory, proudly displaying its own crafty nature. 🤩 The Printception Trophy was specially designed for a contest all about trophies, adding an extra layer of meta-awesomeness to its concept! 🏆🖨️ It takes the idea of a trophy and playfully turns it on its head by representing a 3D printer as the ultimate symbol of achievement. Created using the Creality K1 3D printer, it showcases the creativity of the maker community, emphasizing the very essence of the contest. So, let's celebrate those who embrace the world of 3D printing and honor them with this truly unique and punny trophy! 🎉🏆🖨️ The model is divided into 3 parts (base, hotend, and number). The Hotend section is printed with the use of supports. The tip of the filament is a bit longer than necessary, so I preferred to trim it with a pair of cutters. For the small hole, a little rework with a small drill bit may be needed to facilitate its insertion. The three parts are assembled without glue. If you want to reinforce the junction between the number and the nozzle, a drop of glue can be applied. Print parameters: Slicer software: Creality Print Printer: Creality K1 Filaments: Eryone Ultra Silk Gold, Eryone Dark Brown Wood Infill: 15% Retraction: 0.5 Nozzle: 0.4 Temp: 210, Support: Only for Hotend (touching Build Plate)