Creator 5 Pro Waste Collector and Compactor

Model Overview & Print Notes

Durable waste compactor container for Flashforge Creator 5 / Creator 5 Pro Follow the pictures to put it together. The bottom retainer is not strictly necessary; however, if you want additional security, use some double-sided tape to attach it to the lower portions of the container. Note: Line all surfaces with aluminum tape to prevent the filament from sticking. Pay special attention to the pivoting flap—you may even want to apply a double layer there. The waste container is designed with a removable bottom cap to make it easier to apply the aluminum tape lining. You will also need two 10x1 mm neodymium magnets; place them into the designated slots so that the pivoting flap functions automatically. _______________________________ Durable waste compaction container for Flashforge Creator 5 / Creator 5 Pro Follow the images to assemble it. The lower Clamp is not necessary. If you want to use it for security, simply apply some tape and attach it to the lower ports of the container. Note: Coat all surfaces with aluminum tape to prevent the filament from sticking; pay special attention to the swing arm and apply a double layer as well. The trash container had a lower lid so it was easier to cover the aluminum tape. Two neodymium magnets, 10x1 inches in diameter, also need to be placed in the spaces designated for this purpose to ensure the toggle mechanism operates automatically.

Print profiles

Files (5)