H0: Piers for my Viaduct, H0-scale

Model Overview & Print Notes

Summary And here comes the piers for my viaducts for H0-Unitrack, see https://www.thingiverse.com/thing:7428971 To provided different heights I made column inserts between bottom and head part, so you can get piers in 2.5mm steps using not more than 3 column pieces for up to 2nd track level. There is also a starting point for connection of tracks to the first viaduct. And to overcome this initial height there are minimalistic supports for the track (Step grade) or you may alternatively use supports made for some well-known toy-bricks. A PDF-file is provided to help you figure out the different possibilities and combinations of parts. To fit the viaduct track onto the piers you need the so-called S-Joiner, that are offered by KATO under number 24-817 (20 pieces). I recommend using these original parts, although there are DIY-version available at known portals. Hope you enjoy these extended possibilities to create viaducts with KATO’s great track system. Happy printing and a lot of fun with your model railway layout! Please note: “Kato” and “Unitrack” are trademarks of K.K. Sekisui Kinzoku, Japan and are used for reference only. The design presented here is neither supported nor authorised by the before mentioned trademark holder. Please note the license: My design is published under the CC BY-NC-SA license, which means that you can freely use this model for any non-commercial purpose and may remix this model freely as long as you provide attribution and share with the same creative commons license. Feel free to contact me if any questions.