mySifter+ - Customizable Stackable Sifter Trays

Model Overview & Print Notes

Summary This design is a reverse-engineered design from DanielHomeDesign's mySifter . This remix was published with their explicit permission. This model is a customizable set of box-shaped stackable sifter trays with varying sizes of holes. The pre-generated models include three sizes of boxes: Small (90mm wide, 40mm tall), Large (180mm wide, 80mm tall) and Max (180mm wide, 160mm tall), with 1mm, 2mm, 3mm, 4mm, 5mm, 8mm, 10mm and 20mm holes, as well as bases without holes. Additionally, this includes the customizable .scad file, allowing you to create models at any size with any hole size! These models are cross-compatible with DanielHomeDesign's models. The Large size matches the original model's sizes, whilst the Small size is a 50% scale of them. The differences between the models are as follows: Customizability -- the .scad file allows you to specify your exact sizing The lip undercut is now rounded for better printing results Reduced printing time If you'd like to print a lid, check out the original design . Printing Instructions For sifters with a hole size of 3mm or smaller, it is recommended to reduce the print speeds during the first ten layers to prevent the print from lifting off of the plate. For sifters with a hole size smaller than 2mm, it is also recommended to use a 0.2mm nozzle. For all other sifter sizes, a 0.4mm nozzle is recommended. Changelog 1.0.1 Reduced the circular resolution at smaller hole sizes to heavily reduce rendered STL file size 1.0.0 Initial release Print Settings Printer Brand: Bambu Lab <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Bambu X1C</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>17</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>For sifters with a hole size of 3mm or smaller, it is recommended to reduce the print speeds during the first ten layers to prevent the print from lifting off of the plate.</p><p>For sifters with a hole size smaller than 2mm, it is also recommended to use a 0.2mm nozzle. For all other sifter sizes, a 0.4mm nozzle is recommended.</p></div>