Commander Caddy - Holds 3 Commander Deck Boxes

Model Overview & Print Notes

Summary Commander Caddy – 3-Deck Carry Case A "lunchbox" style carrier that holds three of my trading card deck boxes together, so you can grab your whole Commander lineup in one hand and head to game night. Designed to fit these deck boxes: Trading Card Deck Box Features Holds 3 deck boxes side by side Sturdy carry handle with finger grips Removable front panel that attaches with 2 clips and locks the deck boxes in place Quick access – unclip the front panel and slide any deck out without disturbing the others Mix and match deck box colours to tell your decks apart at a glance Hardware Required 6 × M3 x 25 mm hex head screws Assembly Print all parts. Attach the handle to the handle mounts on top of the caddy using the M3 x 25 screws. Fit the clips to the front panel using the remaining screws. Slide your three deck boxes into the caddy. Clip the front panel into place to hold everything secure. Printing I printed these in PLA at 0.16mm without supports - with gyroid infill it took about 12 hours in total. Make sure to orient the main body with the clip attachments at the top and the rear "lip" facing down, otherwise it will create a nasty overhang during printing. I've found that printing at thicker layers means the overhangs get a bit rougher, but it's probably still possible to print without supports if you're looking to speed up print time. Files Included Caddy body Handle Front panel Clips If you print one, please post a Make – I'd love to see your colour combos!