Magnetic Stickshift Keychain Fidget

Model Overview & Print Notes

Summary This version is quieter but I think its just as satisfying. You move the little knob around and it always goes back to the middle! I have the blank file in here for the lid but the other ones will work too if you want different icons on it. You may need a brim for the lid and the handle. This is for 6x3/6x2 magnets but i might make others if requested. Here is the OG if you want custimizable icons in the corner or different handles -------- > https://www.thingiverse.com/thing:6526813/remixes To assemble, first I suggest marking one side of the magnets first. Just glue one magnet in the gyro part marked side down and one magnet in the very middle hole of the bottom, marked side up. After that just put the gyro on the base part an glue the top on. Try not to get any glue on the gyro! I'm very sorry I couldn't clean it up and get rid of the other holes but it will still work fine. Print Settings Printer Brand: Prusa <p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK4</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.2</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15</p></div></p>