Halloween Polymer Clay Earring Cutter Set STL

Model Overview & Print Notes

Summary Make your own version free in your browser, any size or design: meshcast.app/cutter 100k+ makers follow us on Instagram for new free designs and casting tips: @meshcast.app Four Halloween earring cutters for polymer clay: a ghost, a bat, a pumpkin and a coffin. About this design Four Halloween shapes for polymer clay earrings, each punching its jump ring hole at the top as it cuts: a wavy-hemmed ghost (30 mm), a bat with spread wings (38 mm wide), a round pumpkin with its stem (26 mm) and a coffin (32 mm). Good for Halloween earrings, spooky season craft markets, goth jewellery and party costumes. The pieces come out 22 x 30 mm (ghost), 38 x 14 mm (bat), 26 x 21 mm (pumpkin) and 24 x 32 mm (coffin). Made with our free cookie and clay cutter generator, not modelled by hand: we drew each shape at its size and uploaded it to the tool, with Cut detail into cutter switched on for the jump ring hole. The zip holds exactly what the tool gives you, one STL per cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on, printed rim down with no supports) plus each drawing as an SVG, so you can remake any of them at another size. Every cutter has a small tube inside that punches the jump ring hole in the same press, about 3.2 mm across with at least 1.6 mm of clay round it, so there is no drilling after baking and both earrings of a pair hang the same. For polymer clay earrings: condition Sculpey Premo or Souffle, Fimo or Cernit, roll it 2 to 3 mm thick, dust the blade with cornstarch (or cut through cling film for soft, rounded edges), press straight down and lift. Bake the pieces on a tile as your clay's packet says, for most brands 110 to 130 °C (230 to 275 °F) for 15 to 30 minutes per 6 mm, then sand the edges, varnish or add UV resin if you like, and fit jump rings, ear wires or glued posts. The same cutters cut air-dry clay, precious metal clay, fondant and gum paste, and dough for tiny cookies, but once a cutter has touched polymer clay keep it for clay: print a second set for anything you eat. Glow-in-the-dark clay makes the ghosts, and a thin coat of UV resin on the coffin gives it a glossy lacquered lid. Paint faces on with acrylic after baking, not before. Shown as a 3D render of the four printed cutters and the polymer clay pieces they cut, not a photo. Made with Meshcast Meshcast is a free toolkit for makers that runs in your browser: turn any 3D model into a candle, soap, concrete or silicone mold, or make your own cookie cutters, texture rollers, stamps and keychains. Nothing to install, and you can try every tool without an account. Cookie Cutter Maker: meshcast.app/cutter Guide and print facts for this design: meshcast.app/3d-models/halloween-polymer-clay-earring-cutter-set 400+ ready-made molds and models: meshcast.app/3d-models Meshcast: https://meshcast.app/ Instagram: @meshcast.app How this was made The model is parametric: it is generated by Meshcast's own code, not made by an AI. The pictures are rendered in Blender. We use AI to assist our work (ideas, writing and checking), so this design carries Thingiverse's AI label to be on the safe side. Selling what you make? Free for personal use under CC BY-NC. Selling what you cast or print from this design needs a Meshcast commercial licence (Pro or Founder): meshcast.app/licenses Instructions Print settings Estimated from the files, not sliced, on the same basis as our sliced cutters (PrusaSlicer 2.7.2): 0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 15% infill, MK3-class speeds, for all four files one after another; on one plate they print faster. Rims flat on the bed, no supports. PLA or PETG. What you need Polymer clay: Sculpey Premo or Souffle, Fimo, Cernit or any oven-bake brand An acrylic roller or a pasta machine, and a ceramic tile or baking paper to work on Cornstarch or cling film so the pieces release cleanly A pin or a paper clip to push the clay plug out of the hole punch Findings: 6 to 8 mm jump rings, ear wires or flat pad posts, and jewellery glue for posts Wet sandpaper (400 to 1000 grit) and a varnish or UV resin for the finish, if you like About 11 g of PLA or PETG for all four cutters Steps Print each file as exported: the rim flat on the bed, the blade pointing up, no supports. Condition the clay until it is soft and roll it 2 to 3 mm thick on a tile or baking paper. Dust the blade with cornstarch, or lay cling film over the clay for rounded edges. Press the cutter straight down with a fingertip on the rim, wiggle it a little, and lift. Push the clay plug out of the hole punch with a pin before the next cut. Bake the pieces on the tile as your clay's packet says (most brands 110 to 130 °C, 15 to 30 minutes), never the cutter. Let them cool, sand the edges, varnish if you like, and add jump rings and ear wires or glued posts.