Made By Hand Stamp: 3D Printable Tool, No Supports

Model Overview & Print Notes

Summary Make your own version free in your browser, any size or design: meshcast.app/ 100k+ makers follow us on Instagram for new free designs and casting tips: @meshcast.app MADE BY HAND on two lines in an oval: a small stamp for pottery, polymer clay and leather tags. About this design MADE BY / HAND in a bold serif on two lines inside a thin oval border: a small maker's mark that says it in three words. Mark the foot of pottery, the back of polymer clay pendants and trinket dishes, air-dry clay ornaments and leather tags. Made with our free stamp maker, not modelled by hand: we typed MADE BY / HAND into it, picked the oval shape at 48 by 32 mm with a 1.5 mm border ring and left everything else at the page's defaults. The zip holds exactly what the tool gives you: a stamp plate with a 2 mm raised face and a handle that screws into its back, as one STL, and as a 3MF with the face, plate and handle as separate coloured parts. The page mirrors the face, so the mark reads the right way round, and flares every raised wall a little toward the plate, which helps the stamp let go of a slab of clay. Shown as a 3D render of the printed stamp and the mark it presses into a slab of clay, not a photo. Made with Meshcast Meshcast is a free toolkit for makers that runs in your browser: turn any 3D model into a candle, soap, concrete or silicone mold, or make your own cookie cutters, texture rollers, stamps and keychains. Nothing to install, and you can try every tool without an account. All the tools: meshcast.app/ Guide and print facts for this design: meshcast.app/3d-models/made-by-hand-stamp 400+ ready-made molds and models: meshcast.app/3d-models Meshcast: https://meshcast.app/ Instagram: @meshcast.app How this was made The model is parametric: it is generated by Meshcast's own code, not made by an AI. The pictures are rendered in Blender. We use AI to assist our work (ideas, writing and checking), so this design carries Thingiverse's AI label to be on the safe side. Selling what you make? Free for personal use under CC BY-NC. Selling what you cast or print from this design needs a Meshcast commercial licence (Pro or Founder): meshcast.app/licenses Instructions Print settings Estimated from the files, not sliced, on the same basis as our sliced stamps (PrusaSlicer 2.7.2): 0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 15% infill, MK3-class speeds, in PLA. Plate face down, handle standing, no supports. PLA or PETG; skip TPU, clay needs a rigid face. What you need Clay to stamp: pottery clay at soft leather hard, polymer clay before baking, or air-dry clay Cornstarch for polymer clay, or a damp sponge for pottery clay, so the face lets go cleanly About 11 g of PLA or PETG Steps Print both parts as exported: the plate face down on the bed, the handle standing on its foot, no supports. Screw the handle into the back of the plate until it is snug. Dust the face with cornstarch, or dampen it for pottery clay. Press straight down into the clay with even pressure and lift straight up, without rocking. Brush clay out of the gaps before it dries, and store the stamp face up.