MiG 41 - RC EDF JET - Ducted Fan - Prototype - Aircraft - 84 cm long - 65 mm EDF
Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
Summary Creating my next plane, the russian MiG 41. My Setup for this jet is: 2 Servos, 12 Blade - 65 mm - EDF Fan. 60 Amp. ESC. This Jet has cheater holes for better thrust. Huge 84 cm long - ca. ≈ 930 g. weight with EDF and ESC. I would be glad if you tip me, because this plane is 100 % free for you and there are a ton of hours of work in it. It needs a lot time to create it, so stay updated :-) Regards from Germany! I just printed the model without any infill and with two wall lines — it has good stability. Just mirror the “links” parts to get the full aircraft. You’ll need a large printer — I printed mine on a Bambu Lab A1 with a 25×25×25 cm build volume. No maiden flight yet! Aditional parts needed so far: 4x 1 cm round and 2mm thin neodym magnets 2 x 9g Metal Gear Servo 8 xRudder Hinge 2x 300 mm x1,2mm Servo Rods 4x M2,5x8mm screws for Servo Holder Compartment electric components i am using: 12 Blade -65 mm - EDF Fan. 60 Amp ESC DX5e Spektrum Remote Control (Using Mix Mode Elevon / Delta Mixing, left Servo Port->AILE, right Servo Port -> ELEV) Spektrum AR 600 receiver