Modular Speaker / Monitor Stand

Model Overview & Print Notes

Summary I present to you the "speaker stand" that I have been using for several months now, tested and retested, reaching version 4, and I would add, the definitive one. I decided to publish this project here on ThingIVerse because it is very simple to print and build compared to all the speaker stands present on the portal. It works really well and it is also possible to create and print any type of attachment by replacing the "Speaker Tower" component (currently with holes for screwing onto wooden surfaces or similar) with whatever is most useful to you, for example, in my case: I have a rigid FlyCase for my RX3 console by Pioneer, I will soon create another attachment that will fit along the profile of the rigid FlyCase, and will allow me to keep the Monitors at the correct height for listening, good printing, and good listening! //// NEW UPGRADE //// Modular Speaker Stand Accessories - This is an additional accessory for my 3D-printable kit to build a stand for your DJ studio monitors! Thanks to this extra add-on, you can mount your studio monitors on pretty much any generic tripod (you know, the cheap ones 😄). Let’s go! You’ll find the link to the full video down below 👇 HERE a YouTube video about: https://youtu.be/eMSjTVc3M7g Print Settings Printer Brand: FlashForge <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Adventurer 5M</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.3</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50</p></div></p> <strong>Filament:</strong> FlashForge ASA Black Post-Printing After printing, you will need to insert M3 bolts to connect the platform where the speaker rests to the PITCH joint. You will also need an M4 bolt to secure the YAW joint to the PITCH joint. Additionally, to lock the YAW rotation, although not necessary, you can insert an additional M3 bolt laterally to the YAW JOINT component.