Kinetic Sand Art Tabletop Enclosure

Model Overview & Print Notes

Summary This enclosure is intended to be used with SCARA robotic arm: https://www.thingiverse.com/thing:5907176 Components: (1) Plexiglass - 1/4" (6.35mm) thick x 18" (457mm) diameter (top) (1) Plexiglass - 3mm thick x 388mm diameter (under sand) (0.5) Yd. White Flocking Velvet (spray glue to sand side of 3mm Plexiglass) (1) 2 Way Power Splitter, 1 Female to 2 Male 5.5 x 2.1mm Cable (1) LED Strip Light SMD 5050 RGB+44 Key Remote+12V Power Supply (1) 4 Pin 10mm RGB LED Strip Light Connector Extension Cable 1M (1) Lb. Extra Fine Sand or Baking Soda (1) Steel Ball 10-12mm diameter Hardware: (4) M5 x 16 Flat Head Screws (4) M5 Flat Washers (4) M5 Lock Nuts (2) M3 x10 SHCS (2) M3 Flat Washers (2) M3 Lock Nuts (1) M4 x 16 SHCS (1) M4 Flat Washer (13) M4 Hex Nuts (12) M4 x 10 SHCS (24) M3 x 10 SHCS (24) M3 Hex Nuts Print Settings Printer Brand: Prusa <p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2 mm</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div></p> <strong>Filament:</strong> Hatchbox PLA Various <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Legs_x5, Leg_With_Channel, and Mask_Coupler_x6 are printed vertically and should have a 5-10mm brim. The screw holes in the legs are skinned over to improve bridging at the hex nut features. Drill or clean out the holes before assembly.</p><p>Base_Segment_A, B and C require small build plate supports beneath the vertical dovetail features.</p><p>Base_Segment_C and Clamp contain features that are unique to the power splitter and LED controller that I used. Use the provided STEP file to modifiy the geometry to match your components and then create new STL's as required.</p></div> Custom Section Completed Application <p class="detail-video"><iframe src="//www.youtube.com/embed/Y3L1vJEnQRE" frameborder="0" allowfullscreen></iframe></p>