StealthBurner - Ender 3 adapter plate

Model Overview & Print Notes

Summary Ender 3 Pro adapter for Voron Stealthburner. You might loose few mm of print area, but can be avoided with some modifications (software and Y belt tensioner). My current print area is 230x230. Nozzle offset compared to original position as on attached picture: X = -5,6 Y = -8,3 Bolt collision with gantry bracket @X_MAX: You might want to change to shorter or cut bottom V-Wheel bolt to ensure that there is no collision - see picture attached. In my case I had also to replace nylon lock-nut with standard one. I don't have any issue with V-Wheel loosening (however I have applied a bit of Blue Threadlocker). Designed to be used with exactly the same M3 heatserts as Voron - M3x5x4 (IDxODxL) Print Settings Printer Brand: Creality <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>40%</p></div></p> <strong>Filament:</strong> Fiberlogy R-ABS Anthracite <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Use 0.04mm gap for support:<br>--> prevents warping<br>--> mechanical strength<br>--> decent aesthetics</p><p>Print settings as recommended by Voron:<br>40% infill, 4 perimeters, 5 top/bottom perimeters, enforce 0.4mm print width</p></div> Post-Printing Remove supports and clear holes