Stronger wall-hook

Model Overview & Print Notes

Summary Here's a 2-part hook for safely hanging kitchen pans, or other 'heavy' things. -Use a single M4 screw. Also, I included a small hole at the bottom of the hook for an optional "finishing nail" (-diameter ≤1.5mm) to help prevent rotation. -Please note that the bottoms of each piece are designed to interlock with each-other, and thus will hold firmly in place, once installed. (-Refer to the picture above.) --> I would like to do more with this design, but right now I feel I just don't have so much time to devote to such a small project. For this, I simply wanted a stronger hook than most. The better (i.e. stronger) way to print a hook is with it lying on its side. -But then what about a back-plate that keeps it from twisting?..... So, this is what I arrived at. -Will update/change later, maybe..... Print Settings Printer Brand: Anycubic <p class="detail-setting printer"><strong>Printer: </strong> <div><p>All-metal Mega</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15-100%</p></div></p> <strong>Filament:</strong> Filament-PM PLA Beige <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I used a <em>triangular</em> infill for, presumably, superior strength. (±25%)</p><hr><p>Financial donations are of course not required, but gladly accepted(!):<br>Bitcoin: bc1qtuxsceqgvlfrewzea8kd7jrctthhcuv8hj03jn</p></div>