Modular shower tray system

Model Overview & Print Notes

Summary This is a modular shower tray system with the following components: 1) Shower tray: Can be used to hold small and light items like a bar of soap. It also has 4 hooks which may be used to hang light items like bath sponges. 2) Left/Right hook arms: These arms can be fitted on the basket and have a 38mm aperture so that they can easily be hooked onto pipes or shower handles. 3) Shower screen arm: Can be attached to the basket and used to mount it on a glass screen 5-8mm thick 4) Extension arm: If the other arms are too short, the extensions can be used to extend the arm. Print Settings Printer: SOVOL SV01 <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.16</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>Gyroid, 25%</p></div></p> <strong>Filament:</strong> SUNLU PLA Plus Blue <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>1) These components have been designed so that no supports are needed to print any of them. The extension arm should be printed upright (see picture) to avoid supports.<br>2) If the hook arm is too wide for your printer - remember that it may work if you place it diagonally (see picture).<br>3) The 0.16 layer has is a good compromise for the different components</p></div>