Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
Summary Helmet hanger for maker riders =) IMPORTANT: Print it laying, otherwise its strength is compromised The main part can be printed in a 21x21cm bed without any supports. I inclued 2 options for print the ball: make it on a single piece ( then I recommend add some suports) or print in two halfs and glue. Hope you like it! BUY A PRINTED HANGER - AVAILABLE HERE: https://www.etsy.com/TechToMarket/listing/1025754867/helmet-hanger-motorcycle-helmet-hanger My helmet spikes: https://www.thingiverse.com/thing:4848946 Print Settings Printer Brand: Anycubic <p class="detail-setting printer"><strong>Printer: </strong> <div><p>All-metal Mega</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>I recommend a mid-high infill</p></div></p> <strong>Filament:</strong> PolyMaker PLA / PETG (probably better) <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I printed it on PLA with an infill about 30%. But just in case I should recommend a higher infill. </p><p>However I have not had any deformation problems with mine (both are lightweight carbon fiber helmets).</p><p>The piece have 2 holes for mount in wall and a 3rd hole at back in case you mount it on a wood piece or similar and screw it from behind and secure it more.</p></div>