Foldable Wall Hook (Print in Place)

Model Overview & Print Notes

Summary Redesigned version avaible: https://www.thingiverse.com/thing:6415069 (03.01.2024) A simple, foldable wallmount hook (NO raft, NO support) Inner clearence 0.3mm Rounded at the bottom to prevent first layer vom melting together I suggest the orientation shown at the fifth picture for printing Print Settings for a stable hook: 5 Walls 5 Top 5 Bottom min. 50 % infill 22.12.2020 Added a short version and versions without holes if you want to glue it somewhere Print Settings Printer Brand: Creality <p class="detail-setting printer"><strong>Printer: </strong> <div><p>CR-10</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50%</p></div></p> <strong>Filament:</strong> TINMORRY PETG 1.75mm RED <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Nozzle: 0.4mm<br>Filament used: about 11g (long version with holes)<br>Printing time with my settings about 1h30min (long version with holes)</p></div>