Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
Summary About this Thing A mechanised box with 2 "balcony" drawers. The drawers open with a 120º rotation of the lid. Sliding parts tolerance: 0.25mm Fixing parts tolerance: 0.15mm STL Files Balcony-Base-1X.stl Top Balcony-Top-1X-V2.stl: (without finger recess grips) Balcony-Top-1X-V3.stl: (with finger recess grips) Balcony-Screw-1X.stl Balcony-Drawer- 2X .stl ( Print two of this ) Balcony-Drawer-Floor- 2X .stl ( Print two of this ) All the files are in their correct z-up orientation. This would avoid the need of any support (except Balcony-Drawer-2X.stl which still needs a small 5mm tall support for best results) Assembly walkthrough: https://youtu.be/6mMMvX21UT0 I've invested a lot of coffee in this design Print Settings Rafts: No <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div></p> <strong>Filament:</strong> Flashforge PLA White <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><h3>Only 1 out of 5 STL files needs support</h3><ul><li>Allow supports for Balcony-Drawer-2X.stl""</li></ul></div> Post-Printing Recommended: Remove the Burrs <div><p>If you get <a rel="nofollow" href="https://www.google.com/search?q=plastic+burrs&amp;tbm=isch">plastic burrs</a> (the small edge around the first layer), strip if off with a box knife for precise fit of the moving parts.</p></div> Supports for Balcony-Drawer-2X.stl Remove the supports <div><p>Drawer-2X.stl needs small, only 5mm tall supports for best results. Remove and clean out the area with a box knife.</p></div> <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/17/ec/b5/ae/b6/Artboard.png"></p> <p class="detail-caption"><strong>Supports in Green</strong></p>