Train STATION and PLATFORM - HO Model RailRoads - Parts

Model Overview & Print Notes

Summary This is a miniature Train Station and Train PLatform for Model HO RailRoads. Also checkout: Miniature CITY for HO RailRoads , Miniature TOWN for HO RailRoads Print Settings Printer Brand: RepRap <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Mendel</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Doesn't Matter</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm - 0.8mm Nozzle Tips</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I printed these on a Mendel RepRap with 1.75mm fibre. I used a 0.8mm Nozzle Tip with 0.5mm Layer Height setting. Can use any tip from 0.2mm to 0.8mm should print fine. It took between 3-10 minutes per part to print. - Backbone and Belly Ring should be Rotated 90-degrees to have ball-round surface upon the Table to print properly. - Rafts are suggested for these. - Parts may be a little thin and fragile - so be careful when removing.</p></div> Post-Printing Some Parts may have burrs -and need filing to finish. If the bolts seem loose, gluegun may help. How I Designed This Used TinkerCad. Built this with my custom Meccano Parts. Custom Section Used TinkerCad. Built this with my custom Meccano Parts.