'Lucky' Clover Spinning Key Fobs

Model Overview & Print Notes

Summary 'Lucky' Clover Key Fobs are a small fun print for people of Irish descent or who believe that 4 leaf clovers bring good luck. and, if the luck of the Irish is with you they will spin! There is a 3 and 4 leaf version. They are a quick and easy print without raft or support... and in green of course. There is a small piece of designed in support that should be removed (but isn't essential). Refer to he instructions and images for additional information. Note: If you like this check out the rest of my fun and practical designs. Print Settings Printer Brand: MakerBot <p class="detail-setting printer"><strong>Printer: </strong> <div><p>MakerBot Replicator 2</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.20mm / Standard</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>2 Shells / 75% infill</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Recommend not using Raft so the clover surface is smoother on the bottom. Take care when removing t from your build plate. </p><p>No support required. </p><p>Use high infill to ensure it is strong and will last well on your key ring.</p></div> Post-Printing Remove the designed in support collar (Refer images) <div><p>There is a small designed in support collar on the end that attaches to the key ring. This can be left on however there is a ring around this area to make it cut / break away easily so it works better around a key ring. It should cut / break away fairly easily. </p><p>If your clover fob doesn't spin straight off the build plate a small amount of downward pressure on the clover should free it (Refer images)</p></div>