Geometric Spherical Vase with Diamond Pattern (vase mode)

Model Overview & Print Notes

With its geometric diamond pattern, this vase showcases a striking, modern aesthetic. The triangular texture creates a captivating, almost jewel-like quality that transforms any spot. Whether displayed on a side table or nestled in a cabinet, this vase serves as a stunning focal point. Its distinctive texture and spherical form make it a conversation piece even without flowers, adding interest to your interior. Designed for vase mode printing, it can be 3D printed quickly using larger layer heights and widths, resulting in a durable object. **Specifications** **Dimensions**: 8,8 x 20 cm **Print time**: 2 - 4 hours **Resizable**: yes, in your slicer. **3D Model type**: SOLID body (not hollow inside, specifically designed for vase mode) **Printing technique**: FDM / FFF-only **File type**: STL **Recommended materials**: PLA, PETG **Recommended slicer**: Prusaslicer, Cura, Simplify3D **Print difficulty**: easy **Recommended nozzle diameter and print settings** For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill. **Slicer setting**: vase mode / spiralize outer contours ENABLED **Nozzle diameter**: 0.8mm, 1mm, or larger **Bottom layers**: 8 **Perimeter speed range**: 15 - 30 mm/s **Layer height range**: 0.1 mm - 0.6 mm **Extrusion width / wall thickness range**: 1mm, 1.2mm or 1.4mm+ **Watertight?**: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion. **License info**: PERSONAL USE ONLY, unless you have a commercial license. Note: these are real photos of my test print that I made with a DSLR and a studio light (these are not renders / AI). Filament I used is SILK PLA.

Files (1)