Jack Skellington Pumpkin 2025 edition - Halloween Lantern Decor - No Supports 3D Print STL/3MF

Model Overview & Print Notes

The **Jack Skellington Pumpkin 2025 edition** is finally here! ### [If you want ALL the versions, you can go grab them all for FREE on our patreon page](https://serev3d.com/go?source=cults&content=Skellington_Pumpkin&placement=to-patreon&campaign=&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d) We reworked the inside structure completely: - ✅ The **big lantern** **Prints in under 8 hours** (compared to +11 hours of the 2024 edition!) - ✅ **No supports needed anymore** - faster, cleaner, and more ecological 🌍 - ✅ Same iconic spooky look you loved last year, now optimized for everyone’s printer. (ALSO FITS the A1 Mini perfectly!) And that’s not all, this year’s release comes with **extra versions**: ⭐ Big lantern size _~8hours_ ⭐ Tealight version _~1h40m_ ⭐ Candy bucket _~9h total, small version ~5h_ ⭐ Keychain version ~30minutes ⭐ Magnet version ~30minutes ⭐ Ultra-tiny Skellington pumpkin ~15minutes, sized perfectly to fit in the hands of the Serev3D Ghosts! ---- [Go grab these extra versions for free on our Patreon](https://www.patreon.com/posts/137905126) - For **commercial license and the rights to sell the 3d prints** of our designs, [**become a paid member on our patreon**](https://serev3d.com/go?source=cults&content=Skellington_Pumpkin&placement=to-patreon&campaign=&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d) **Painting recommendation if you use the white filament:** Base Coat: After sanding (optional), leave the filament as is for a base color or lightly prime it with a translucent coat. Shading: Use black and brown acrylic paints for dry brushing around the eye sockets, mouth, and crevices to enhance depth. Sealing: Apply a matte clear coat to maintain a natural, weathered look. **Painting recommendation if you use the black filament:** Lightly sand the 3D print to smooth any rough areas (optional). White Paint Dabbing: Use a sponge with white acrylic paint. Dab lightly on the surface, focusing on raised areas. This will leave the crevices black for natural shading. Layering: Gradually build up layers of white by repeating the dabbing, letting each layer dry between coats to control the brightness. Finishing Touch: Seal with a matte clear coat to protect the surface and maintain the organic look. --- ## 🛍️ **SELL YOUR 3D PRINTS – KEEP 100% OF PROFITS!** 💰 **Turn your 3D printer into a business!** As a **paid All-Access Member - Merchant Tier**, you get: ✅ **Permission to sell physical prints** of our designs on **Etsy, Amazon, Facebook, eBay, your store & conventions** ✅ **No royalties or restrictions** – Keep **100% of your sales!** ✅ **Authorized Seller Badge** for credibility & trust ✅ **Your store featured** on our **"Authorized Sellers" page** to attract buyers [🛍️ **Get your Seller Badge & start selling!**](https://serev3d.com/go?source=thangs&content=002_Jack%20Skellington%20Pumpkin&placement=auth_seller&to=https%3A%2F%2Fwww.patreon.com%2Fcheckout%2FSEREV3d%3Frid%3D23799323) 🔗 **More info on commercial licensing & discounts:** [SEREV3D Website](https://serev3d.com/go?source=thangs&content=002_Jack%20Skellington%20Pumpkin&placement=more_info&to=https%3A%2F%2Fserev3d.com%2F) --- ## 🔥 **More Amazing Designs Released Every 2-3 Days!** 🚀 Stay ahead with fresh new models **every few days!** ✅ **Get instant access to our newest releases & premium STL files** ✅ **Unlock all past & future designs with a Patreon membership** ✅ **Sell your prints with commercial rights – Join the Authorized Sellers List!** [🔹 **Join SEREV3D Now & Start Printing!**](https://serev3d.com/go?source=thangs&content=002_Jack%20Skellington%20Pumpkin&placement=join_patreon_bottom&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d) [](https://serev3d.com/go?source=thangs&content=002_Jack%20Skellington%20Pumpkin&placement=banner_image&to=https%3A%2F%2Fwww.patreon.com%2FSEREV3d) --- ## 🎛️ **Recommended Print Settings** *(If you use **Bambu or Orca Slicer**, all the print settings are automatically loaded in each version’s 3MF files!)* 🔹 **Layer Height:** 0.2 🔹 **Wall Loops:** 2 🔹 **Infill:** 7% - Style: gyroid 🔹 **Supports:** No supports needed!

Files (1)