Colorado Flag Keychain - Single Extruder Multi Color Print

Model Overview & Print Notes

I wanted to try printing a multi-color print on my single extruder printer. To print this I lined up all the files in Cura (I uploaded the project file, All.3mf , if you want to try and just use that) The deleted all of the objects except for the one I was printing. Once it was done I immediately preheated the bed and nozzle (as to avoid warping) and switched to the next color. You need to print them without brims or rafts, and I had it so my initial layer height was 0.3mm with one layer on top of that. As long as you don't make them too thick you should be fine. I printed them in the order: CO - White.stl CO - Blue.stl CO - Red.stl CO - Gold.stl Shell - Black.stl It shouldn't matter the order too much as long as you print the shell last. Print instructions Category: Keychains Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.1 mm Infill: 25% Filament: Hatchbox ABS True Blue; True White; True Black; True Red; Yellow

Files (6)