Shower Caddy - Corner Design - Multiple Versions

Model Overview & Print Notes

Sturdy large shower basket. Check the download section for versions for both left and right shower corners. The tray connects to a rod / bar by screwing the two parts together.  It provides ample storage space while tucking neatly into the corner without being too obtrusive. The inner part leaves a gap for the shower hose (see pictures).    Needed for assembly : 4 x M4 10mm imbus bolt (round head) and 4x M4 nut.  Rod diameters supported: 20mm, 23mm, 25mm, 28mm, 30mm.  Minimum distance from rod to side: 100mm. Minimum distance from rod to back: 42mm. Print Settings:  Prusament Marble Gray PLA, 0.2mm layer height, 3 wall loops, 15% gyroid infill. Print from step file for best results.  

Files (12)