Thumb Wars Lightsabers (Finger toys)

Model Overview & Print Notes

1. Introduction The perfect toys to print if you want to play “thumb war” like a true Jedi or with the dark side of the force like a Sith Lord ! First, chose your handle and your destiny !  I design all handles based on the real ones you can see in the movies. I will add more and more by the time and based on the model success. Then chose the color of your Kyber Crystal ! Blue: truth and protection. The force supplements your skills to defend the light side. Green: growth and harmony. The force helps you to see the good path. Purple: nobility and wisom. Both sides of the force are balanced in you. Yellow: power and hope. Protect what needs to be. Red: anger and determination. You use the dark side to feed your hate ! Orange: ambition and creativity. Balance both sides to innovate. Silver/White: purity and peace. The peace is your only goal.  In other words, buy the good filament color ;p   2. Revision History Version Description Date Beta.1 Beta Release 22/12/2023 A.1 Initial Release LukeSkywalker Handle 23/12/2023 A.2 Improve Threads Add DarthVader Handle Add ObiWan Handle 23/12/2023 A.3 Add KyloRen Handle (not tested) 25/12/2023 A.4 Add versions with the Jedi/Sith's name written on the handle. 25/12/2023 A.5 Add Yoda Handle 27/12/2023 A.6 Add picture with multicolor sabers. Thx @JHelmstetter_741569 for the picture. 18/09/2024 A.7 Improve tolerances on KyloRen Handle and quillons. Thx @VardaanArora_3198300 for the feedback.  08/09/2025   3. Printing Instructions Handles PETG or PLA Layer Height: 0,2 Min 2 perimeters No Support required Min 15% infill Infill Pattern: Gyroid Top and Bottom Layer Pattern: Concentric Positioning: according to 3mf files Kyber Crystals PETG or PLA Layer Height: 0,2 + Variable Layer Height with Quality/Speed=0,4 Min 2 perimeters No Support required Min 15% infill Infill Pattern: Gyroid Top and Bottom Layer Pattern: doesn't matter Positioning: according to 3mf files Please note that handles have been designed for a 19-20mm wide thumb. Please scale them according to yours. (Measure your thumb at the widest, between the phalangeal bones).   4. Materials for Assembly (BOM) The printed parts   5. Manufacturing and Assembly Instructions Just download the relevant files and print it. Clean the parts, remove burrs, etc. Screw the “laser” in the handle. For KyloRen Handle, glue the quillons bases and screw the quillons inside them. For Yoda Handle, insert the “shield” in the slot. Secure with glue if necessary. One, two, three, four, I declare a thumb war !     5. Notes Please, play with the lightsabers carefully. Follow Yoda's advices and be clement to avoid breaking thumbs or blind you or you opponents ;) Don't blame me otherwise ! Thx to Boba Fonts who shares his “Star Jedi” font which I use in the cover. G-code files only made for MK3S+. The file contains some custom lines to add a pre-heating before the printing to avoid oozing during the mesh bed levelling. Do not use the g-code file on other machines than MK3S+ ! In any case, I recommend you to slice the .3mf files by yourself to make your own g-code files.   Have a nice print ! Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusameters to continue ;)

Files (12)